Stables / Field Shelter Specifications / Dimensions

Pitch Roof as above
| Eaves Height | 2.2 Metres (86.5") |
| Ridge Height | 2.7 Metres (106.5") |
Pent Roof as above
| Back (Lowest Height) | 2.130 Metres (7') |
| Front (Height) | 2.290 Metres (7'-6") |
| (These heights are before roof perlins are fitted) | |
Note: Sizes of above are nominal and may vary slightly.
Please Note:
We use metric lengths of timber when constructing our Stabling / Shelters (i.e) A 12' X 12' building will be 3.6 X 3.6 (approx) or a 24' X 12' will be 7.2 X 3.6 Metres (approx).
However we can make buildings to a special size (i.e) 36' X 12' but you will have to inform us of this!
| Framing thickness | 75mm X 50mm ( 3' X 2") |
| Roof Perlins (Pent roof only) | 125mm X 50mm ( 5" X 2" ) |
| Shiplap Cladding | ( Ex 125 X 16mm ) Finishes at 13mm |
| Lapboard Cladding | 125 X 11.5mm |
Roof Coverings
| OSB Board | 11mm Thick and 2.440 X 1220 ( 8' X 4' ) |
| 20Kg Mineral Roofing Felt | ( We recommend gluing down don't use felt nails ) - Felt adhesive not supplied. |
Stable Doors
Are supplied with galvanised chew strip (to top edge of bottom door only). Also door bolts are provided.
We also provide a basic amount of screws / nails for assembly.We strongly recommend adding heavier gauge screws and metal brackets for securing roof perlins and trusses down especially If buildings are to be sited in a windy / exposed positions.
Extras
Partitions are supplied as loose material which is made into dividing internal walls. (75mm X 50mm 3" X 2" Framing) and sheets 11mm thick OSB.
Kick boards are 2.440 X 1220 sheets OSB 11mm thick.
Maintenance
We Recommend applying a good quality wood Preserver approx every 18 months or so. Also seal all external panel joints with a water proof mastic sealant.
Foster Fencing Ltd, Units 34 & 35, Wynford Industrial Park, Yokesford Hill, Romsey, Hampshire, S051 0PE
All buildings are supplied only with a base coat treatment as a temporary measure (this is not a waterproofer). Once erected we strongly recommend that you give your building 2/3 extra coats of a good quality wood preserver/water repeller. These are available from builders merchants and ideally the better products are those containing silicones and waxes. We also recommend sealing up all joints with a waterproof mastic sealant. Timber being a natural product is subject to movement i.e, shrinkage, warping, splitting, knot holes etc may occur, therefore we cannot guarantee againt this.



















